BlackBerry 8310 with Damage Repair Camera

Nokia C6-00 Charging Solution Ways

Nokia is a brand of mobile phones is very popular in the world. In the market, mobile phones Nokia has been circulating in various types. One of them is Nokia 3110c.

1. For security, back up first RPL and PM before upgrade.
2. Flash your Nokia 3110c using Nokia 3500c firmware
3. Write Pm
4. Unlock
5. Reset full factory

Nokia 1280 light way without ic 100% tasted by all mobile solution

Good news to all Samsung galaxy s3 users, the international version of Samsung galaxy s3, which have been the world’s best-selling smartphone, now already received the much anticipated Android 4.1.2 Jelly Bean update over-the-air. Many major national carriers has released Android Jelly for the device, and other Carrier-branded versions like Verizon Wireless should be able to receive the update soon as Samsung is railroading updates for its devices. But some only offer an update that must completed via Samsung Kies software and is not offered over the air.
The new Android 4.12 Jelly Bean Update brings a list of amazing features now only located in Samsung Galaxy Note 2 to Samsung S3, like highly-anticipated Multi View multitasking system, Smart Rotation function , camera filters, low-light photo mode, an easy mode and so on. For some people you may find it is difficult for you to update or wait any longer. So here I will show you How to update Android 4.1 Jelly Bean on Galaxy S3 immediately.Pre-requisites 

1. Be sure to backup your data before starting the update
2. Make sure your battery is at least 50% charged.
3. Make sure that you have install Kies software on the computer, and if you dont have Kies, you can download it from Samsung website.

For international version: If the software update didn’t popped up in the notifications area, you can update your Samsung Galaxy S3 to Android 4.1.2 Jelly Bean by connecting the terminal to Kies or OTA, by manually checking for the update for the latter method. Just go to Settings > About Device > Software Update > Check for Updates and see whether the new firmware has rolled out for your device.

Heres How to Update Your AT&T Samsung Galaxy S III to Android 4.1 Jelly Bean

• Connect your Samsung Galaxy S III to your PC or laptop using the supplied USB cable. Ensure that Kies recognizes your device by looking in the upper section of the left-bar navigation menu. Your device should be listed.
• Kies Device Once Kies recognizes the device you will see a Lcd stating new firmware is available.
• Click Update.
• Read through the Caution pop-up and, if you agree, click to populate the I have read all of the above information checkbox.
• Read the Allow saving of information statement and select Allow saving or Proceed without saving and then click Start upgrade.
• After a few minutes, Kies will then begin transferring the firmware binary to the device.
• Then after a while the upgrade is completed.
• If completed a data backup from your device to Kies prior to performing the update, you can now restore that data back to the device under the new Jelly Bean operating system 

Nokia 1110, 1600, 2310 Display ways 100% Solution

In this section you will found the Latest T733 Mainboard v2.1 Firmware so you can upgrade the board and fell the next performance. This is the firmware for china tablet that has the same board ID. You can also use this firmware in t733 mainboard version 2.0. There is an instance that the front facing camera might not work for this kind of tablet. Because of different camera drivers. This firmware is flashable via Livesuite or PhoenixSuite.
you can download   T733 Mainboard v2.1 Firmware here

Nokia N8 Water Damage Shorted Problem Solution, Water Damage Shorted ,Water Damage Shorted ,Water Damage Fully Shorted

Nokia 6233 Camera Problem Camera Operation Failed Camera On Standby Camera Not Working

Nokia C2-03 MMC is not working or it do not accept memory card it can be cause of water damage and rust. It can be due to MMC jack and damage pins. And this problem can be reason of MMC I.C So lets check all these parts and try to Repair Memory card Problem in Nokia C2-03.


The above diagram have a red line to show you which parts are used in Memory Card function so check these parts and in first step try to clean them with electronics cleaner and apply some hot air to dry it.
Once it is dry check and if not working then replace this I.C to solve memory card problem in Nokia C2-03.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.

Nokia X2-00 Battery Terminal Points Damage Ways Problem Solution if in Nokia X2-00 during changing battery terminal points you have loss battery points then you can solve this problem with this diagram bellow posted in this post.


there are three different color lines in this post shows that how you can make jumpers so check these links with meter and if any of them is broken make these jumpers with insulation wire.this diagram can help you in case Nokia X2-00 is dead you can check these links so that battery crunt can pass through right ways and can be set on off.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

1-Nokia C2-03 not charging problem.
2-Nokia C2-03 Do not show charging.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-charging base if old one is damage.
6-old board of Nokia C2-03 if a few parts are damage in this board.So that they can be replaced.
7- Charger to diagnostic it.

Solution:-
1-Plugin charging pin in charging jack and check.
2-if charging symbol is not appearing in display it can be fault of missing track pr charging jack.
3-change battery and check again.
4-if Not charging symbol appear on display it can be fault of r22 or 24k resistance.
5-Disassamble Nokia C2-03 and look at whole mother board carefully for rust or carbon.
6-Clean carbon area and the area shown in above diagram with electronics cleaner.
7-Apply heat with hot air so that it can be totally dry.
8-Do not apply to much heat it can be harm for your skin and mobile as well.
9-chek all these tracks as shown in the above diagram and if any path is missing apply jumpers.
10-if parts are missing or damage replace them.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
At time of assembling keep in mind about fitting. If fitting is not proper charging jack will not attach and it will not show charging and will not start charging.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.

when we plugin charging pin into charging jack of Nokia 110 and it do not shows any thing it can be fault of missing track or parts in it and can be fault of charging base.While if it shows not charging then it can be reason of water damages or low volt.so here is a diagram to help you to understand charging parts and there tracks.

look at above diagram and clean all these parts which are given in it.clean all these parts and apply hot air to dry the board.Check these parts with meter and if path is missing apply jumpers as given in above diagram solution.to Fix charging problem you can replace charging base also.Red line shows positive track of charging function while blue is a ground print.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.