Showing posts with label c2. Show all posts
Showing posts with label c2. Show all posts
Wednesday, November 19, 2014
Nokia C2 03 Charging not supported Solution
- C2-03 Charging Solution
- C2-03 Chargin Problem
- C2-03 Chargin Ways
- C2-03 Charging IC
- C2-03 Chargin Not Supported Solution
- C2-03 Chargin Not Supported Solution
Saturday, November 15, 2014
Nokia C2 05 display light solution jumpers repair solution
nokia c2-05 light problem , nokiac2-05light problem , nokia c2-05-2 light problem , nokiac2-05light problum, c2-05, nokia c2-05 light problem solution, nokia c2-05 light repair solution Nokia C2-07 Camera Standby Notworkin Problem Solution Jumper Ways
c2-05-2 light sollutin on gsm forum, nokia c2-05 light nokia c2-05 light carquet, nokia c2-05 light soi, nokia c2-05 laet, ways, nokia c2-05 liqht problem
c2-05-2 light sollutin on gsm forum, nokia c2-05 light nokia c2-05 light carquet, nokia c2-05 light soi, nokia c2-05 laet, ways, nokia c2-05 liqht problem
Friday, November 14, 2014
Nokia C2 03 MMC Memory Card Problem Solution Ways
Nokia C2-03 MMC is not working or it do not accept memory card it can be cause of water damage and rust. It can be due to MMC jack and damage pins. And this problem can be reason of MMC I.C So lets check all these parts and try to Repair Memory card Problem in Nokia C2-03.
The above diagram have a red line to show you which parts are used in Memory Card function so check these parts and in first step try to clean them with electronics cleaner and apply some hot air to dry it.
Once it is dry check and if not working then replace this I.C to solve memory card problem in Nokia C2-03.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Read More..
The above diagram have a red line to show you which parts are used in Memory Card function so check these parts and in first step try to clean them with electronics cleaner and apply some hot air to dry it.
Once it is dry check and if not working then replace this I.C to solve memory card problem in Nokia C2-03.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Thursday, November 13, 2014
Nokia C2 03 Not Charging Problem jumpers Ways Solutions
1-Nokia C2-03 not charging problem.
2-Nokia C2-03 Do not show charging.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-charging base if old one is damage.
6-old board of Nokia C2-03 if a few parts are damage in this board.So that they can be replaced.
7- Charger to diagnostic it.
Solution:-
1-Plugin charging pin in charging jack and check.
2-if charging symbol is not appearing in display it can be fault of missing track pr charging jack.
3-change battery and check again.
4-if Not charging symbol appear on display it can be fault of r22 or 24k resistance.
5-Disassamble Nokia C2-03 and look at whole mother board carefully for rust or carbon.
6-Clean carbon area and the area shown in above diagram with electronics cleaner.
7-Apply heat with hot air so that it can be totally dry.
8-Do not apply to much heat it can be harm for your skin and mobile as well.
9-chek all these tracks as shown in the above diagram and if any path is missing apply jumpers.
10-if parts are missing or damage replace them.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
At time of assembling keep in mind about fitting. If fitting is not proper charging jack will not attach and it will not show charging and will not start charging.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Read More..
2-Nokia C2-03 Do not show charging.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-charging base if old one is damage.
6-old board of Nokia C2-03 if a few parts are damage in this board.So that they can be replaced.
7- Charger to diagnostic it.
Solution:-
1-Plugin charging pin in charging jack and check.
2-if charging symbol is not appearing in display it can be fault of missing track pr charging jack.
3-change battery and check again.
4-if Not charging symbol appear on display it can be fault of r22 or 24k resistance.
5-Disassamble Nokia C2-03 and look at whole mother board carefully for rust or carbon.
6-Clean carbon area and the area shown in above diagram with electronics cleaner.
7-Apply heat with hot air so that it can be totally dry.
8-Do not apply to much heat it can be harm for your skin and mobile as well.
9-chek all these tracks as shown in the above diagram and if any path is missing apply jumpers.
10-if parts are missing or damage replace them.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
At time of assembling keep in mind about fitting. If fitting is not proper charging jack will not attach and it will not show charging and will not start charging.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Thursday, November 6, 2014
Nokia C2 00 Dual SIM card connection Tracks v 1
Nokia C2 00 Dual SIM card connection Tracks v 1
Wednesday, November 5, 2014
Nokia C2 02 Camera Standby Notworkin Problem Solution Jumper Ways
Nokia C2-02 Camera Problem, Nokia C2-02 Camera Standby Mode can be cause of water damage or breakage. To solve this problem in the mobile phone you can follow a few steps that i am going to describe in this post.
In first step restore factory setting in Nokia C2-02. Then make a full flash (software firmware) installation. And the third step is to check hardware diagnostic. After dis assembly of phone check the whole mother board carefully.If there is some rust or carbon on board then clean it with electronics cleaner and apply some heat with hot air. So that the mother board can be dry.
If mother board can not be full dry it can create carbon in future so keep in mind it should be dry.Do not apply much heat as it can harm your skin and mother board of cell phone.
In above diagram as you can see there are different color lines. These lines are indicating tracks that are used in camera function so check these paths and apply jumpers as shown in above diagram.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
In first step restore factory setting in Nokia C2-02. Then make a full flash (software firmware) installation. And the third step is to check hardware diagnostic. After dis assembly of phone check the whole mother board carefully.If there is some rust or carbon on board then clean it with electronics cleaner and apply some heat with hot air. So that the mother board can be dry.
If mother board can not be full dry it can create carbon in future so keep in mind it should be dry.Do not apply much heat as it can harm your skin and mother board of cell phone.
In above diagram as you can see there are different color lines. These lines are indicating tracks that are used in camera function so check these paths and apply jumpers as shown in above diagram.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update daily this blog timely with other mobile solution.
Tuesday, October 14, 2014
Nokia C2 01 Power END key Jumper Ways
Nokia C2-01 Power/END key Jumper Ways
nokia c2-03 power button not working
nokia c2-01 on off jumper
nokia c2-03 on off track
Nokia c2-03 power problem
nokia c2-03 on off switch ways
nokia c2-01 on off ways
nokia c2-03 power solution
nokia c2-03 on off problem
nokia c2-03 call button not working
nokia c2-01 no power
If the Nokia C2-01 shows charging indication when the battery charger is plug-in, but unable to turn ON. This problem is cause by a faulty power ON-OFF key . Fixing it is quite so easy, you mat first try to clean the PCB board’s keypads matrix and the keypad membrane.
If the keypads mats is cleaned and doesn’t solve the problem, refer to the solution below and trace the power/end key connection line paths.
nokia c2-03 power button not working
nokia c2-01 on off jumper
nokia c2-03 on off track
Nokia c2-03 power problem
nokia c2-03 on off switch ways
nokia c2-01 on off ways
nokia c2-03 power solution
nokia c2-03 on off problem
nokia c2-03 call button not working
nokia c2-01 no power
If the Nokia C2-01 shows charging indication when the battery charger is plug-in, but unable to turn ON. This problem is cause by a faulty power ON-OFF key . Fixing it is quite so easy, you mat first try to clean the PCB board’s keypads matrix and the keypad membrane.
If the keypads mats is cleaned and doesn’t solve the problem, refer to the solution below and trace the power/end key connection line paths.
Thursday, September 25, 2014
Nokia C2 03 C2 06 C2 08 Memory Not Detected Solution MMC IC Jumper Tracks Ways
Heres another solution that covers for Nokia C2-03, C2-06, C2-08 memory card not detected problem cause by wet damaged or any possible causes like oxidation build ups etc.The Nokia C2-03, C2-06 and C2-08 slider phone has designed with a built in ESD and EMI filter chip that protects the system circuit if theres something went wrong from the memory card. In most Nokia PCB design this chips were also found and called as "MMC filter IC". So, in troubleshooting Memory card not detected problem mostly it can be fix by replacing the said MMC IC.
Heres some hints on how to fix Nokia C2-03, Nokia C2-06 or Nokia C2-08 Dual SIM card, slider phone with touch and type features.
1) If memory card is not detected error shows, try to use another working memory card. The memory card might be corrupt or already damaged.
2) Check for possible damaged and or clean the memory card connector pins and its surroundings components on the PCB board.
3) Check the firmware, reflash, restore or update to latest version if necessary.
4) Check, resolder, rework or replace the memory card filter chip (MMC filter IC)
Heres some hints on how to fix Nokia C2-03, Nokia C2-06 or Nokia C2-08 Dual SIM card, slider phone with touch and type features.
1) If memory card is not detected error shows, try to use another working memory card. The memory card might be corrupt or already damaged.
2) Check for possible damaged and or clean the memory card connector pins and its surroundings components on the PCB board.
3) Check the firmware, reflash, restore or update to latest version if necessary.
4) Check, resolder, rework or replace the memory card filter chip (MMC filter IC)
| Nokia C2-03, C2-06, C2-08 Memory Not Detected Solution |
Tuesday, September 16, 2014
Nokia C2 01 microphone problem Jumpers
Nokia C2-01 with Mic, Mic Jumpers, Mic Problem, Mic Solution, Mic Ways, Microphone
nokia c2-01 microphone problem Jumpers
c2-01 mic ways
c2-01 mic solution
mic c2-01
nokia c2-01 speaker problem
c2-01 mic jumper
nokia c2-01 mic problem solution
nokia c2-01 mic way
nokia c2-01 not power on
nokia c2-01 no signal
nokia c2-01 signal drop solution
This is the Nokia solution for C2-01 Mic, mouthpiece microphone is not a problem. The solution repair guide below simply shows the paths connecting the microphone to solve problems.
nokia c2-01 microphone problem Jumpers
c2-01 mic ways
c2-01 mic solution
mic c2-01
nokia c2-01 speaker problem
c2-01 mic jumper
nokia c2-01 mic problem solution
nokia c2-01 mic way
nokia c2-01 not power on
nokia c2-01 no signal
nokia c2-01 signal drop solution
Saturday, August 30, 2014
Nokia C2 03 C2 06 C2 08 Not Charging Problem Solution
Now working on with the new solution for Nokia C2-03, C2-06 and C2-08 with Dual SIM phone capability. This time we will tackle first the charging circuit in case handling into troubleshooting a not charging problem, due to wet damaged or any possible causes.
The highlighted components below are the basic components of Nokia C2-03, C2-06 and C2-08 charging circuit just like any other Nokia previous PCB designs, the only thing always makes any different is the location of those particular components location being mounted on the PCB board.
And heres how to fix a not charging problem for Nokia C2-03, C2-06 and C2-08:
1) Ensure and check first the wall charger, battery and battery connectors for possible damaged.
2) Check the charging pin connector (DC jack), clean it including the terminal contact pads. Replace if necessary.
3) Check the charger voltage protection components such as the fuse, diode, filter coil and capacitors. Replace if found damaged.
4) Trace the charger voltage line paths for possible open circuit or cut-off lines.
5) Check the charging voltage transistor switching circuits, including the 0.15 ohms fusible resistor.
The highlighted components below are the basic components of Nokia C2-03, C2-06 and C2-08 charging circuit just like any other Nokia previous PCB designs, the only thing always makes any different is the location of those particular components location being mounted on the PCB board.
And heres how to fix a not charging problem for Nokia C2-03, C2-06 and C2-08:
1) Ensure and check first the wall charger, battery and battery connectors for possible damaged.
2) Check the charging pin connector (DC jack), clean it including the terminal contact pads. Replace if necessary.
3) Check the charger voltage protection components such as the fuse, diode, filter coil and capacitors. Replace if found damaged.
4) Trace the charger voltage line paths for possible open circuit or cut-off lines.
5) Check the charging voltage transistor switching circuits, including the 0.15 ohms fusible resistor.
| Nokia C2-03, C2-06, C2-08 Charging Problem Solution |
Sunday, August 24, 2014
Saturday, August 16, 2014
Subscribe to:
Posts (Atom)
