Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

Wednesday, October 22, 2014

Samsung Galaxy Note 10 1 SHW M480S Running 4 1 2 Jelly Bean Firmware Simple Tutorial How to Root

If you are looking for an easy and working method to root your Samsung Galaxy Note 10.1 SHW-M480S (South Korea) Tablet, then youre on right place. Here youll find a simple step by step guide to root Galaxy Note 10.1 M480S running on Android 4.1.2 Jelly Bean official firmware. The device was released with Android 4..0.4 ICS and last updated to Android 4.1.2 Jelly Bean (Latest Firmware for Galaxy Note 10.1 M480S). If you own the device, then you can now root it using the below tutorial.

After having an Android Tablet or, after updating official firmware, many of us prefer to root our device to enjoy some additional features that unrooted android Tablet doesnt offer. With a rooted android Tablet, you can install apps that ask root permission, flash various custom ROMs, install MODs and tweak various features. Root removes default bloatware apps that free-up lots of memory space and extend the battery life. To know more about benefits of rooting android Tablet, read- Complete Note on What is Rooting and Benefits of Rooting Android Tablet.

So, want to root your Galaxy Note 10.1 SHW-M480S? Continue reading this page to get all the necessary steps to successfully root your device. The root file (CF-Auto-Root) we used in this tutorial is safe and have nearly 100% success rate. Well use Odin software to flash the root file.

The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.

Caution

  • This rooting tutorial is only applicable for Samsung Galaxy Note 10.1 SHW-M480S model (p4noterfskt). So, dont try this in any other android device. Check your device model number from- Settings-About Tablet. 
  • Rooting voids your Tablets manufacturer warranty. However, you can get back the warranty anytime by flashing official firmware.
  • This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.

Pre-Requisites:

  • Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver
All the above pre-requisites are very important and must be followed before proceed to installation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide on how to root Galaxy Note 10.1 SHW-M480S running on official firmware.

How to Root Galaxy Note 10.1 SHW-M480S Running Android 4.1.2 Jelly Bean through Odin:

  1. Download CF-Auto-Root for Galaxy Note 10.1 M480S and extract the Zip file: CF-Auto-Root-p4noterfskt-p4noterfskt-shwm480s.zip
  2. Download Odin 3.07 and extract the Zip file: Odin 3.07.Zip
  3. Now, Switch off your Tablet and boot Galaxy Note 10.1 M480S into Download Mode by pressing and holding the Volume Down and Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 10.1 M480S to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, click on the PDA button and select the CF-Auto-Root-p4noterfskt-p4noterfskt-shwm480s.tar.md5 file.
  9. Finally, click on the Start button to begin the rooting process, wait few moments.
  10. Once completed, you would see “PASS!” message in ID:COM port having green background
  11. Your Tablet should automatically reboot after completion
  12. You can now disconnect your Tablet from computer
  13. Finish
Congrats! You have completed the tutorial to root Galaxy Note 10.1 M480S running on official firmware. Hope you successfully done the rooting process. If you followed everything as mentioned in the above tutorial, then your Galaxy Note 10.1 M480S should now rooted and you have complete control over your device. Now, install apps that ask root permission or flash various custom ROMs. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store. If you have any doubt or query about the tutorial, feel free to contact with us using the comment form below, and share your rooting experience with us.
Read More..

Monday, September 22, 2014

TUTORIAL Make Rooted PiPO Smart S1 Look like Nexus 7! Free Download Rom

Nexus 7? WRONG! Its Just PiPO S1 Running Android 4.2.2
On the First Tutorial of NicDroid Gazette, Ill teach you to Look Your Dual-core PiPO Smart S1 into a Nexus 7 (ATTENTION: Requires Root for Phablet Interface.) Find Out How below the Break.

PiPO S1 is a Dual-core Rockchip Tablet with 1.6GHz with Mali-400 Quad-core GPU, 1GB Ram but 8GB of Storage but Expandable up to 32GB. Running on Android 4.1 Jellybean (by Stock/Default.)
You Will Need Is:
  • PiPO S1 Tablet and Data Cable
  • Rockchip Batch Tool - Download Here
  • RockUSB Drivers - Included at Rockchip Batch Tool
  • Sumvision Cyclone Voyager 4.2 ROM (Rooted by Kasty)- Download Here
  • Root Explorer (Any)
  • Cyclone Voyager Patch v1 by AlmoSTacey - Download Here
  • A Windows PC (Windows 7 Recommended)
  • A Brain and Patience
  • Nova Launcher (Prime or Free - Download it at Play Store)
First, You Need to Backup your Files on Your Tablet because It Will Erase EVERYTHING after the 4.2.2 Update.
Once Its done, You Gonna Put your Tablet into "FLASH MODE / FIRMWARE UPDATE MODE" by Turning it Off. Connect the Other End of the Data Cable into the USB Port of the PC just to Get Ready but Dont Connect the Tablet Yet, Press and Hold "Volume - " button and Connect the USB into the Tablet. when The PC Detected as An Unknown Device, Install It Using with the RockUSB Drivers Included at Rockchip Batch Tool.
When Its now Installed, Open the "RockChip Batch Tool" as an Administrator and You Will See this:
The Download Link I Gave You is Version 1.7 but It Works the Same Way. ON 3, CLICK RESTORE! NOT UPGRADE.
Click The Button near the FW Path (1) and Select Your downloaded Cyclone Voyager ROM. But First You Need the 1 (refer from 2) to be Green means that the Tablet is in Firmware Update Mode. once its done, CLICK RESTORE (Not Upgrade) and Wait for Few Minutes.
When Its Done, It Will Restart Itself and You Will see the Sumvision Logo and Default Android BootLcd. Its now Up for You to Setup and Install the Root Explorer.
Copy the buildv1.prop that You Got from Cyclone Voyager Patch by AlmoSTacey and Rename it to "build.prop" then Make the Root Directory R/W first then Copy/Move to System and Replace the Original Build.prop.
Next to Long Tap It and Press "Permissions" and set it ot rw-r--r-- and Press OK (If You Dont Know how to Set Permissions, Refer Below.
And Youre Done! All You Need to do is Reboot and You Will see the the Phablet Interface!
The Stock Launcher made only for Landscape Mode, So You Can Download and Customize Yourself with Nova Launcher.
Notifications on Phablet UI Works Pretty Well. Know that Guy from the Left? What Blog does he Came From?
Everything on 4.2.2 Works Well and Improves Performance and Battery Life. They Can Easily Noticed the Thick Bezels but It comes with an Advantage but Ill let You Find Out Why. Heres the Antutu Benchmark Test and Enjoy

Read More..

Monday, August 18, 2014

II Tutorial II Create PhoenixCard Allwinner Chip Script Update With SD Card By Azim

II-Tutorial-II-Create PhoenixCard-Allwinner Chip Script Update With SD Card
III-Tutorial-III
How To Create PhoenixCard
How Allwinner Chip Script Update Using SD Card

Friends,
Please Post About Thread Title
If Any One Feel Problem Post Here I Will Reply You
Only Post About This Thread Title


Use Thanks Button If You Like To Use & Care Forum Rules

Ha Ha Ha
No Need Bootkey , Usb , PhoenixSuit & LiveSuit.exe
Update Your Allwinner Chip Using SD Card
Also
For This Not Require Any Mode
Just On Your Tab & Start Update (Auto)
Lest See Tutorial
With Tested Report

How To Create PhoenixCard Using PhoenixCard.exe

Open Your PhoenixCard.exe
Click To DiskCheck Then Select Your Disk (Memory Drive)

PhoenixCard-Allwinner

Click To IMG File & Select Your .IMG (Image) File
PhoenixCard-Allwinner

Screenshots Number 3 Gide By AzimBahar ..::One-Man::..

PhoenixCard-Allwinner

Click To Normal Format & Wait ...After Format Success Click To Ok

PhoenixCard-Allwinner

Click To Brun & Wait For Brun Done
PhoenixCard-Allwinner

Brun Done , Now Your PhoenixCard Is Ready Card Create Done For Update
PhoenixCard-Allwinner
Read More..